Flotation machine FML 3 (240 FL) [New]

Characteristic features:
The machines provide high accuracy of industrial flotation process modeling. The flotation machine is equipped with a frequency converter.
Flotation machine device:
The main working parts of the machine are the impeller block, the chamber and the foam separator with a blade. The impeller block and the foam separator are mounted on the housing, inside which the impeller drive motor, the foam separator drive, and the electrical components of the machine are located. The upper part of the housing is closed with a lid, under which the impeller drive is located. The chamber is installed on the housing using a guide device and fixed with a rotary table.

Technical characteristics of FML 3 (240 FL)
Useful capacity of chambers, l 1.5; 2.0; 3.0
Impeller diameter, mm 70
Impeller rotation speed, s-1 15-40
Amount of air sucked in by the impeller at maximum rotation speed, l/s, not less than 0.07
Drive power, kW 0.18
Supply voltage, V 220
Overall dimensions, mm
Length 480
Width 380
Height 760
Weight, kg 35